Projection Screens

Accessories & Control Equipment

Control Accessories

Powdercoat Chart

CUSTOM POWDER COAT COLOURS

3500001

Screen Technics has in-house powder coating facilities and as such can provide custom colours for frames and headbox canisters in a timely fashion, just make sure you specify your colour preference from the Dulux Powder Coat Chart - www.duluxpowders.com.au and please note there will be an additional charge for this service and several days longer supply lead-time.


top-leader

 

 

 

 

 

 

 

EXTRA TOP BLACK LEADER

3500000

Additional top leader can be ordered with most roll down screens (except the Presenter HT) and assists when you require extra drop to mount the screen canisters higher up the wall or on the ceiling. Please be aware that additional leader will degrade somewhat the lay-flat qualities of your screen and that limits exist on maximum leader lengths, so please seek advice before ordering.


Flat-ceiling-brackets.jpg

 

 

 

 

 

 

 

 

FLAT CEILING MOUNT BRACKETS  

3500400

For Presenter HT and Lecturer screens only, designed for ceiling fix situation from below, where access to ceiling above is not available. Brackets overhang the ends of the screen canisters by approximately 34mm each end. Please specify colour and product you require brackets for on your order.

Note: Not required for Elecricinema.


 

 

 

 

 

 

 

 

PULL DOWN ROD

3500300

To assist in reaching highly mounted manual hanging type screens, comes standard with the CinemaPro screen range, optional for all others.It is made from clear Perspex and is 950mm long to reach those high up installs.


150mm L Shape Brackets

 

 

 

 

 

 

 

 

150mm L SHAPE WALL BRACKET

3500100

All roll down projection screens can be mounted using these extension wall brackets, which provide clearance for other wall mounted products such as whiteboards. Available in Black or White and you need to specify which screen product they are for as there are different fixture types. 


Hanging Brackets

 

 

 

 

 

 

 

HANGING BRACKET

3500106S & 3500106L 

Suitable for the CinemaTech, CinemaPro and ElectriCinema screens only, this bracket provides a twin hanging point for chain or cable install. Please specify which colour and product you require the brackets for on your order. 


Threaded Rod Bracket

 

 

 

 

 

 


THREADED ROD ADAPTER BRACKET

3500107S & 3500107L 

Suitable for the CinemaTech, CinemaPro and ElectriCinema screens only, this bracket provides a twin hanging point for a 5/16 Whitworth Threaded Rod. Please specify which colour and product you require the brackets for on your order.


RTS Remote

 

 

 

 

 

 

 

 

 

RADIO FREQUENCY CONTROL

Integrated in-motor radio frequency control for any motorised roller screens (except Viewmaster) and must be ordered at time of screen manufacturer. A preferred method of remote control over larger distances in commercial environments where IR signals are often too weak. It also has product grouping and intermediate setting facilities. Comes standard with hand held single channel transmitter.

For those situations where IR or Contact Closure control are not suitable Screen Technics offers a range of RTS control products, RTS is a preferred method of remote control over larger distances in commerical environments where IR signals are often too weak. It also has product grouping and intermediate setting facilities.

Available in the following configurations:

3500902 - RTS RF Transmitter / Hand Held Type

3500807 - RTS Integrated RF Control with Hand Held Remote

3500808 - RTS Integrated RF Control with Wireless Wall Switch

3500804 - RTS Indoor Receiver Module. 


 

 

 

 

 

 

 

CONNECT IR TRANSMITTER

6500101

Spare hand held transmitter suitable for the Connect Control Module - 4 channels. Must be used in conjunction with Connect IR Sensor item no. 6500102.

Note: Supplied with every Electricinema and Interfit AV lifting device.


IR Sensor

 

 

 

 

 

 

 

 

CONNECT IR SENSOR

6500102 - 300 mm - 2000mm 

This IR sensor plugs straight into Connect Control Module and should be used in conjunction with the Connect IR Transmitter item no. 6500101.


24v Motor Controller

 

 

 

 

 

 

 

 

 

CONNECT 24V MOTOR CONTROL MODULE

6500200

A standard feature with all 141020AZ, 141020AW, 141024BW and 141024BX Interfit AV Lifters with fixed travel, this motor controller is available as a stand alone unit to offer control over 24 VDC 50 Hz Motors. In basic configuration it allows impulse wall switch and dry contact closure for an overriding building management system, plus can be daisy chain linked to another Connect Module for single switch control of multiple devices, up to 9 modules in total.


240V Motor Controller

 

 

 

 

 

 

 

 

CONNECT 240V MOTOR CONTROL MODULE

6500100

A standard feature with all ElectriCinema Screens and all Interfit AV Lifters, this motor controller is available as a stand alone unit to offer control over 240v 4 core products. In basic configuration it allows impulse wall switch and dry contact closure for an overriding building management system, plus can be daisy chain linked to another Connect Module for single switch control of multiple devices, up to 9 modules in total.


iReply Devices 

ireply 2

 

 

 

 

 

 

 

iREPLY IP2

6500302

The iReply interface can control up to 2 iConnect modules - projector screens, lifters and blinds. It allows iConnect modules to be controlled and monitored via multiple communication protocols. 

 

iREPLY IP4

6500304

The iReply interface can control up to 4 iConnect modules - projector screens, lifters and blinds. It allows iConnect modules to be controlled and monitored via multiple communication protocols.

 

iREPLY IP8

6500300

The iReply interface can control up to 8 iConnect modules - projector screens, lifters and blinds. It allows iConnect modules to be controlled and monitored via multiple communication protocols.


 

 

 

 

 

 

 

 

 

CONNECT 12V TRIGGER RELAY KIT

6500500

This item when plugged into the RJ12 left hand port of the Connect Control Module switches the device when low voltage current is applied (5v to 24v) from a Projector or AV receiver low volt trigger output, and the screen rolls.


 

 

 

 

 

 

 

 

CONNECT iSENSE CURRENT SENSING TRIGGER 

6500400

Designed to function with a Connect Motor Control Module. Simply plug the trigger between the power point and the device it is sensing. When 240v Power is detected a dry contact is closed allowing up / down control of iConnect Devices.

Please Note - Due to the wide variety of projector designs we can not guarantee that this product will work in all applications.


 

 

 

 

 

 

 

 

 

2 BUTTON IMPULSE WALL SWITCH

3500998

Suitable for use with any Connect controlled product including the ElectriCinema and the Interfit Lifter Range, this wall switch runs off the impulse contact closure and allows simple up and down control.


 

 

 

 

 

 

 

CONNECT DAISY CHAIN LINK CABLES RJ12 / 6 Core Flat

6500104

These cables come in 10 metre lengths and allow you to daisy chain link two or more Connect Modules and allow them to communicate for multiple switching options, the operation is left hand port in and right hand port out to the next module, in a line of up to 9 Connect Modules.

 

 

 

 

 

 

 

 




Search
Find your product