Connect Control

iSense

Click on images to enlarge/reduce
isense_thumb.jpgisensecs2-2_thumb.jpgfailed_aussie built coloured_thumb.jpg
Current Sensing Trigger Devices

CS1  Item No 6500400   

The iSense series of Trigger Device is designed to switch an iConnect controlled product, such as projection screens, blinds, AV lifter etc – when a primary AV device has power turned on.

FEATURES

  • Designed to sense 240V (max load 2A) switch on
  • Simply plug the trigger between the power point and the device it is sensing
  • When 240V power is detected a dry contact is closed allowing up / down control of iConnect Devices
  • The iConnect motor controller must be reprogrammed with IR transmitter to latched contact mode
  • Includes sensitivity threshold adjustment
  • Designed when no DC voltage trigger is available in projector / amplifier etc
  • To be used in conjunction with ElectriCinema and Connect motor control range, cannot be used in conjunction with the ViewMaster Pro range
Note:
  • Due to wide variety of projector designs we can not guarantee that this product will work in all applications.  
  • This Trigger is designed to work with a latched contact closure which is available in the Electricinema screens and Connect Motor Controllers. This trigger can not be used with the ViewMaster Pro range of screens.

iSense

 


CS3  Item No 6500412   

The iSense series of Trigger Devices are designed to switch an iConnect controlled product, such as projection screens, blinds, AV lifter etc – when a primary AV device has power turned on.


FEATURES

  • Designed to sense 240V (max load 2A) switch on
  • Simply plug the trigger between the power-point and the device it is sensing
  • When 240V power is detected a 12 volt pulse is sent allowing up / down control of iConnect Devices
  • Includes sensitivity threshold adjustment
  • Designed when no DC voltage trigger is available in projector / amplifier etc
Note:
  • Due to wide variety of projector designs we can not guarantee that this product will work in all applications. 
  • To be used with the ViewMaster Pro range

CS2  Item No 6500500  

The iSense series of Trigger Devices are designed to switch an iConnect controlled product, such as projection screens, blinds, AV lifter etc – when a primary AV device has power turned on.

Features
  • Designed to sense 5-24 volt DC output from a projector / amplifier etc
  • Connects to DC output via 2 core cable (not polarity sensitive)
  • Connects via RJ11 6P6C 6 core cable (300mm supplied) to iConnect device
  • When DC power is detected a down command is sent / and upon zero detection an up command is sent
  • No need for threshold adjustment
  • Powered via the iConnect device
  • Must be connected to the Connect Network IN port on the 1st iConnect device
Note:
  • Due to wide variety of projector designs we can not guarantee that this product will work in all applications.
  • 12v trigger is a standard feature on the internal control board supplied in a ElectriCinema & ViewMaster Pro. An external 12v trigger device is not required with these screens.

 

iSense

 

Item NoDescription
6500400CS1 - iSense 240v Current Sensing Module
6500412CS3 - iSense 12v Current Sensing Module
6500500CS2 - iSense 12v Trigger Device