Projector Bracket Accessories

Features

Check out our full range of projector bracket accessories to further enhance your Screen Technics products.


Extra Long Spider Arms

Extra Long Spider Arms

For those large commercial projectors where the mounting holes are spread too far for the standard spider arms - Standard Arm reach is 140mm from centrepoint (280mm Diameter), with the extra long arms having 220mm from centrepoint (440mm Diameter) reach capacity.

Item No.

  • 1422000

Ceiling Trim Kit

Ceiling Trim Kit

Allows for the bracket pole to be run through the ceiling material and fixed to a suitable structure above the ceiling line, and provides for a neat trim cover of the cut hole, held in place securely by grommet screws.

Item No.

  • 1421000

Cut Down Collar

Cut Down Collar

This bracket system is designed to be cut down to the required pole length on-site, and then the system simply screws back together after the pole has been trimmed. But if you are not able to perform a neat right-angle cut on-site, you can use the deeper cut-down collar which will cover unsightly cutting and square up the pole in relation to the back plate.

Item No.

  • 1423000

Top Ball Joint Assembly

Top Ball Joint Assembly

Got a sloping cathedral ceiling? Well, use this top ball joint to fit to the ceiling (up to 30 degrees adjustment) and adjust the pole and bracket to the appropriate vertical plane.

Item No.

  • 1424000

Vertical Surface Mount Bracket

Vertical Surface Mount Bracket

This bracket can be used with the standard bracket or the top ball joint assembly to fix to a vertical plane, such as an overhead beam.

Item No.

  • 1425000

50mm Truss Mount Base Plate

50mm Truss Mount Base Plate

Optional base plate to suit Interfit Projector Bracket Range, allows projector bracket to be mounted to a 50mm truss with M8 U Bolts.

Item No.

  • 1425001

Equipment Tray

Equipment Tray

Equipment tray to suit Interfit Projector Bracket Range 350mm wide x 290mm deep x 50mm High and Max load rating 2kg.

Tray clamps onto the pole of the Projector bracket.

Cannot be used with a 142000A Flush mount projector bracket.

Item No.

  • 1428999

250mm Base Plate

250mm Base Plate

Optional base plate to suit Interfit Projector Bracket Range, base plate is 300mm square and 250mm centre points.

Item No.

  • 1425006

450mm Base Plate

450mm Base Plate

Optional base plate to suit Interfit Projector Bracket Range, base plate is 490mm long x 90mm wide and mounting holes are 450mm x 50mm from centre point.

Item No.

  • 1425009

Adjustable Base Plate

Adjustable Base Plate

Optional base plate to suit Interfit projector bracket range, allows bracket to be rotated + or – 90 degrees for raked ceiling or sidewall installation.

Item No.

  • 1425007