ST Projection Screens
ST Screen Accessories
ST Interfit Lifters
Peerless AV Mounts/Digital Signage
ST Projector Brackets
SI Intelligent Surfaces
You are here:
ST Screen Accessories
Custom Powder Coat Colours
With in-house powder coating facilities, Screen Technics can provide you custom colours for frames and headbox canisters.
ElectriCinema Pole Mount System
Architectural solution to deal with high ceilings. Allows the screen to be positioned at the perfect viewing height with pole extension up to 4m long.
Extra Top Black Leader
Additional top leader can be ordered with most roll down screens.
Motorised Swing Arm
If your ceiling is too high for a traditional projection screen installation, this mechanical arm will raise and lower your screen from a flush position.
72" - 150" diagonal
Pull Down Rod
To assist in reaching highly mounted manual hanging type screens.
Connect 12V Trigger Relay Kit
This item (when plugged into the RJ12 left-hand port of the Connect Control Module) switches the device when low voltage current is applied (5v to 24v) from a projector or AV receiver low volt trigger output, and the screen rolls.
Connect 240V Motor Control Module
A standard feature with all ElectriCinema Screens and all Interfit AV Lifters, this motor controller is available as a standalone unit to offer control over 240v 4 core products.
Connect 24V Motor Control Module
A standard feature with all 141020AZ, 141020AW, 141024BW and 141024BX Interfit AV Lifters with fixed travel.
Connect Daisy Chain Link Cables RJ12 / 6 Core Flat
These cables come in 10 metre lengths and allow you to daisy chain link two or more Connect Modules and allow them to communicate for multiple switching options.
Connect IR Sensor
Plugs into a Connect Control Module and should be used in conjunction with the Connect IR Transmitter item no. 6500101.
Connect IR Transmitter
Spare handheld transmitter suitable for the Connect Control Module - 4 channels.
Connect iSense Current Sensing Trigger
Designed to function with a Connect Motor Control Module.
The iReply interface can control up to two iConnect modules - projector screens, lifters and blinds.
The iReply interface can control up to four iConnect modules - projector screens, lifters and blinds.
The iReply interface can control up to eight iConnect modules - projector screens, lifters and blinds.
Two-Button Impulse Wall Switch
Suitable for use with any Connect controlled product, including the ElectriCinema and Interfit Lifter ranges.
© 2017 Screen Technics