- You are here:
- Home
- Products
- ST Projection Screens
- Motorised Screens
- Screen Lowering Device
Screen Lowering Device
Sizes 72" - 220" diagonal
What do you do if you have a very high ceiling, say in a church or town hall? You lower the projection screen into position, then motor down the screen.
Using a secondary motor system that lowers and raises an ElectriCinema projection screen into position, the device comes with a top enclosure for the screen to rest in when not in use and full cable management for the primary screen and secondary lift motor.
Fully integrated with Connect contact closure and IR plus the ability to link and group switch with other Connect control devices.
Benefits include
- Lowers the screen into position
- Screen enclosure
- Back-up fall arrestor for additional safety
- System includes screen
Features
Screen Lowering Device - Type B
Sizes 72" - 140" diagonal
Headbox
- Screen - white as standard
- Black and silver at no charge
- Lowering device made from EZero MDF
- Underside and trim painted in low VOC two- pack white
Surface
- Unity white black backed fiberglass
(Gain 1.1)
Roller Diameter
- ?
Screen
- ElectriCinema screen included
Borders
- 50mm side and bottom borders
Leader
- 300mm standard adjustable top leader
- Additional leader available up to 600mm
(charges apply)
Power Required
- Standard 10A GPO (Maximum draw 1.5A)
Control
- Connect IP, 12V trigger input, contact closure, IR remote
Brackets
- Eight captive nuts 8mm
Lowering Device Travel
- Equal to screen image width
Optional Extras
- Rear projection surface
- Twin white surface
- Reverse rolled
- RF controlled
- Impulse wall switch
Warranty
- 3 years (see T&C for more details)
Screen Lowering Device - Type C
Sizes 150" - 220" diagonal
Headbox
- Screen - white as standard
- Black and silver at no charge
- Lowering device made from EZero MDF
- Underside and trim painted in low VOC two-pack white
Surface
- Unity white black backed Fiberglass
(Gain 1.1)
Roller Diameter
- 110mm
Screen
- ElectriCinema screen included
Borders
- 50mm side and bottom borders
Leader
- 300mm standard adjustable top leader
- Additional leader available up to 800mm
(charges apply)
Power Required
- Standard 10A GPO (Maximum draw 1.5A)
Control
- Control IP, 12V trigger input, contact closure, IR remote
Brackets
- Eight captive nuts 8mm
Lowering Device Travel
- Equal to screen image width
Optional Extras
- Rear projection surface *
- Twin white surface *
- Reverse rolled
- RF controlled
- Impulse wall switch
Warranty
- 3 years (see T&C for more details)
